For the uninitiated, this is an introduction and guide on how to use the “AdjProg” utility that is often required to reset the waste ink counter on Epson inkjet printers.
Content:
- How to run the program
- Initial Settings
- Things to avoid
- How to read the current counter and what it means
- Resetting the counter
- Getting out of the utility
- Warnings re: resetting and ignoring the waste ink
This time I’ve covered the D88 printer but the RX685 and R1900 are also on my list for some point in the future.
Low Quality/Resolution (see below for link to higher quality version)
The high quality (800×600 resolution) version is available by clicking this link
…or you can view the iPhone version
My first vidcap tutorial on this subject was a bit long winded and harder to follow so I’ve learned how to keep it short and got it down to 4 minutes (ish) with my new version so hopefully it’s better as a result.
[…] This post was mentioned on Twitter by Martin Smallridge. Martin Smallridge said: Vidcap now online: Resetting waste ink counter – Epson Inkjet printers http://bit.ly/dcZ0kd . What to do, avoid + why resetting alone = nuts […]
[…] Tutorial: Epson Adjustment Utility IPR – Ink Pad Reset, On Topic 12.07.2009 A newer vidcap tutorial/guide is also […]